Brother International BES-941BC Instruction Manual - English - Page 159

After adjustment is finished, reset the stop, are positioned in a straight line.

Get Brother International BES-941BC PDF manuals and user guides View all Brother International BES-941BC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 159 highlights

e w * Bad example q Toward this side Chapter 8 Standard Adjustment • The thread trimmer connecting rod B q has a backlash of about 0.1 ~ 0.2 mm back and forth. Tighten the two bolts e while pulling them forward by the backlash amount. • Tighten the two bolts e so that the thread trimmer connecting rods B q and C w are positioned in a straight line. 5. After adjustment is finished, reset the stop switch. "Release stop SW to operate!" disappears. t r 6. Turn the power switch off once, then on again. Check that the clearance between the movable knife r and the fixed knife t is 1 mm. 7. When adjusting again, follow the step 2 and 1mm after. BES-941BC • BES-1241BC 157

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
Chapter 8
Standard Adjustment
BES-941BC • BES-1241BC
157
•
The thread trimmer connecting rod B
q
has a backlash of about 0.1 ~ 0.2 mm back
and forth.
Tighten the two bolts
e
while
pulling them forward by the backlash
amount.
•
Tighten the two bolts
e
so that the thread
trimmer connecting rods B
q
and C
w
are positioned in a straight line.
5.
After adjustment is finished, reset the stop
switch.
"Release stop SW to operate!" disappears.
6.
Turn the power switch off once, then on
again.
Check that the clearance between
the movable knife
r
and the fixed knife
t
is 1 mm.
7.
When adjusting again, follow the step 2 and
after.
q
w
e
* Bad example
1mm
t
r
Toward
this side