Brother International BES-941BC Instruction Manual - English - Page 94
Setting of Needle Bars
View all Brother International BES-941BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 5 Setting Setting of Needle Bars Needle bars allocated in the sequence of sewing can be modified. This setting is explained on the basis of the BES-1241BC screen. 1. Press . 2. Select a sewing sequence to modify by pressing . The current embroidering sequence is selected while embroidering is interrupted. Press for modifying all sequences at one time. 3. Input the number of a needle bar by pressing ten keys. When inputting a numerical figure exceeding 10, press the 0 first. SPACE Insertion of Feedhold Press and reverse the display on the right of a point to insert a feedhold, then press . STOP A feedhold mark is displayed. 4. Press END . Modified setting is saved and the previous screen is displayed again. 92 BES-941BC • BES-1241BC
BES-941BC • BES-1241BC
92
Chapter 5 Setting
Setting of Needle Bars
Needle bars allocated in the sequence of sewing can be modified.
This setting is explained on the basis of the BES-1241BC screen.
1.
Press
.
2.
Select a sewing sequence to modify by pressing
.
The current embroidering sequence is selected while embroidering is interrupted.
Press
for modifying all sequences at one time.
3.
Input the number of a needle bar by pressing ten keys.
When inputting a numerical figure exceeding 10, press the
0
SPACE
first.
Insertion of Feedhold
Press
and reverse the display on the right of a point to insert a feedhold,
then
press
STOP
.
4.
Press
END
.
Modified setting is saved and the previous screen is displayed again.
A feedhold mark is displayed.