Brother International BES-941BC Instruction Manual - English - Page 160
Adjusting the Belt Tension
View all Brother International BES-941BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Chapter 8 Standard Adjustment 7. Adjusting the Belt Tension The belt Tension is adjusted to the optimum tension at the time of shipment from the factory. However, as the belt is used,it becomes run in and may loosen around the machine pulley and motor pulley . Use the following procedure to check the belt tension. w q 8 mm of deflection in the belt 9.8 N (1 kgf) of pressure w slot e Place a gauge against the belt q, loosen the nut w, and then turn the nut e to move the slot to the appropriate position so that there is 8 mm of deflection in the belt q when 9.8 N (1 kgf) of pressure is applied. The machine operating direction is counterclockwise when seen from the machine pulley end. 158 BES-941BC • BES-1241BC
Chapter 8
Standard Adjustment
BES-941BC • BES-1241BC
158
q
w
e
w
7. Adjusting the Belt Tension
The belt Tension is adjusted to the optimum tension at the time of shipment from the factory.
However, as the belt is used,it becomes run in and may loosen around the machine pulley
and motor pulley . Use the following procedure to check the belt tension.
Place a gauge against the belt
q
, loosen the nut
w
, and then turn the nut
e
to move the slot
to the appropriate position so that there is 8 mm of deflection in the belt
q
when 9.8 N (1 kgf)
of pressure is applied.
The machine operating direction is counterclockwise when seen from the machine pulley
end.
slot
8 mm of deflection in the belt
9.8 N (1 kgf) of pressure