Brother International BES-941BC Instruction Manual - English - Page 31
Fix the legs and the table using the F table stays A 2 pcs., and B 2 pcs., while the F, table R, and L
View all Brother International BES-941BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
o u !0 Chapter 1 Preparation of Embroidery Machine y t !0 3. Fix the legs and the table using the F table stays A (2 pcs.) o and B (2 pcs.) !0 while the F table R t, M y, and L u are fixed at the upper position. * Dismounting can be carried out in the reverse procedures. Note) • Use two F table stays (B) with one notch at both ends of the F table R t and L u. • When mounting the F table stays A (2 pcs.) o and B (2 pcs.) !0, fit the F table stay notch into the table, then fix the notch to the legs using the thumb bolts. Dismounting can be carried out in the reverse procedures. • When the F table is at the lower position, the F table stays A and B need not be used. BES-941BC • BES-1241BC 29
Chapter 1
Preparation of Embroidery Machine
BES-941BC • BES-1241BC
29
3.
Fix the legs and the table using the F table stays A (2 pcs.)
o
and B (2 pcs.)
!0
while the F
table R
t
, M
y
, and L
u
are fixed at the upper position.
* Dismounting can be carried out in the reverse procedures.
Note)
•
Use two F table stays (B) with one notch at both ends of the F table R
t
and L
u
.
•
When mounting the F table stays A (2 pcs.)
o
and B (2 pcs.)
!
0
, fit the F table stay notch into the table,
then fix the notch to the legs using the thumb bolts.
Dismounting can be carried out in the reverse procedures.
•
When the F table is at the lower position, the F table stays A and B need not be used.
!
0
o
u
y
t
!
0