Brother International DCP 7020 Users Manual - English - Page 23
How to load paper, To load paper or other media in the paper tray, paper tray
UPC - 012502612834
View all Brother International DCP 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Introduction How to load paper To load paper or other media in the paper tray 3 Fan the stack of paper well to avoid paper jams and mis-feeds. 1 1 Pull the paper tray completely out of the DCP. 4 Put paper in the paper tray. Maximum Paper Mark 2 While pressing the paper guide release lever, slide the adjusters to fit the paper size. Check that the guides are firmly in the slots. 5 Put the paper tray firmly back in the DCP and unfold the output paper tray support flap before you use the DCP. Output Paper Tray Support Flap Note For Legal size paper, pull out the back of the paper tray while holding the inside latch of the tray. Note When you put paper in the paper tray, please remember the following: ■ Check that the paper is flat in the tray and below the maximum paper mark, and that the paper guides are touching the sides of the paper stack. ■ The side to be printed on must be face down. 1 - 10