Brother International HL-1260 Service Manual - Page 150

1.31 DC Gear Holder Assy (1) Remove the DC motor connector, then remove the paper delivery holder spring. (2) Loosen the 4 screws and remove the DC gear unit from the body. (3) Remove the paper delivery gear assy, the gears, the gear 48 spring, and the washer. (4) Loosen the 3 screws and remove the DC motor assy from the gear holder. DC gear unit Paper delivery holder spring Gear 21 Paper delivery gear assy Gear 48 Gear 48 spring 4 screws Gear 28 Gear 22/55 Washer Gear 20/50 Remote switch PS switch wire DC motor assy Gear 24/72 Gear 39 3 screws DC gear holder assy Figure 4.11 Connector Figure 4.12 1.31.1 Scanner fan motor (1) Loosen the 1 screw and remove the scanner fan holder. (2) Loosen the 2 screws and pull out the scanner fan holder from the scanner fan motor. (3) Remove the scanner fan motor harness connector from the main PCB. screw Scanner mount plate 2 screws Scanner fan motor Scanner fan holder Figure 4.13 IV - 6