Brother International HL-1260 Service Manual - Page 253
The print surface must be face up.
View all Brother International HL-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
CHAPTER 2 GETTING STARTED 1. Open the multi-purpose tray by pressing the front door of the tray lightly and lowering it gently. Note Pull out the extension tray of the multi-purpose tray for long paper if it is necessary. Fig. 2-19 Opening the Multi-purpose Tray and Pulling Out the Extension Tray 2. Lift up and slide the paper width guide to the far right side. 3. Place a stack of paper or envelopes on the tray until it is securely seated. Notes When you place paper on the multi-purpose tray, note the following: • The print surface must be face up. • The leading edge must be placed inside first and lightly against the printer. • The left side must be aligned with the left guide. • The top of the paper stack must be under the holders on both sides of the tray. The maximum thickness is 16.5 mm or 0.65 inches. 2-15