Brother International HL-1260 Service Manual - Page 162
Press the CONTINUE
View all Brother International HL-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Error Message 31 PRINT OVERRUN 32 BUFFER ERROR 34 MEMORY FULL 40 LINE ERROR 41 PRINT CHECK Table 6.2 Error Messages Meaning Print overrun Action Press the CONTINUE switch to start printing the next page. Data which overran the print area on the page cannot be printed. Check your page protection setting with the MODE switch. Setting page protection to the correct size could solve this problem. If printing at 600 dpi, you may need to add optional SIMM memory. Input buffer overflow Press the CONTINUE switch to resume printing. Data lost in overflow cannot be printed. Work memory overflow Press the CONTINUE switch to resume printing. If the same error should occur after you press the CONTINUE switch, turn off the printer. Wait a few seconds, then turn it on again . Reduce the input buffer size. Turn off "KEEP PCL." Add SIMM memory with power off. Download font and the font saved in the HDD card might cause the error, for it occupies the same work area as the RAM. Memory expansion is recommended in that case. Error in the communications circuit When the serial interface is used, check the communications parameters such as baud rate, code type, parity, and handshake protocols. When the parallel interface is used, check the interface cable connection. Error in communication with the engine controller Turn off the printer. Wait a few seconds, then turn it on again. See M-17. VI - 10