Brother International HL-1260 Service Manual - Page 43
Display Circuit
View all Brother International HL-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. DISPLAY CIRCUIT 3.1 Outline The control panel of this printer has four LED lamps, one LCD display, and eight switches. The control panel is connected to the Main PCB and its functions are as follows: (1) The LCD shows the printer status and error message in alpha-numeric characters. (2) The LED lamps indicate the operating conditions of the printer. (3) The printing mode and LCD brightness can be changed by switches. LED1 LED2 LCD SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 LED3 LED4 PAD4-PAD7 LED2 (READY) LED3 (DATA) LED4 (ALARM) LCDE, LCDRS LED1 (ONLINE) SW8 (SEL) SW7 (MODE) SW6 (FONT) SW5 (FORM FEED) SW4 (SET) SW3 (CONTINUE) SW2 (DOWN) SW1 (UP) Main PCB Figure 3.8 Display Circuit 3.2 Operation Indicators on the control panel (LED lamps and LCD) are controlled by the video controller circuit. All the switch signals are input to the video controller circuit. Signals Descriptions: LED1 - LED4 On-off control for the respective LED lamps. Illuminating when Low and extinguished when High. PAD4 - PAD7 LCD control signal. LCDRS A signal to distinguish PAD4 - PAD7 into command and data. LCDE A signal to start the operation. SW1 - SW8 Input signals from the switches. Going Low when each switch is pressed. III - 11