Brother International HL-1260 Service Manual - Page 166
L means Long.
View all Brother International HL-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Service Call Message 99 SERVICE 12 Meaning Software1 Trap 99 SERVICE 13 Software2 Trap Action Turn off the printer. Wait a few seconds, then turn it on again. If it's still displayed on the LCD, replace the Main PCB. Turn off the printer. Wait a few seconds, then turn it on again. If it's still displayed on the LCD, replace the Main PCB. * "L" means "Long". * "S" means "Short". * "I" means "Instruction". * "D" means "Data". Note: When the service error reads on the LCD, it means that there is an CPU error. The possible cause is an hardware failure of the CPU or a program's bug, which caused CPU error in correspondence. VI - 14
Service Call Message
Meaning
Action
Turn off the printer. Wait a
few seconds, then turn it on
again. If it's still displayed
on the LCD, replace the
Main PCB.
Turn off the printer. Wait a
few seconds, then turn it on
again. If it's still displayed
on the LCD, replace the
Main PCB.
99 SERVICE 12
99 SERVICE 13
Software1 Trap
Software2 Trap
* "L" means "Long".
* "S" means "Short".
* "I" means "Instruction".
* "D" means "Data".
Note:
When the service error reads on the LCD, it means that there is an CPU
error. The possible cause is an hardware failure of the CPU or a program's
bug, which caused CPU error in correspondence.
VI
- 14