Brother International HL-6180DW Quick Setup Guide - English - Page 15
For Wired Network Interface Cable Users for Macintosh, Before you install, Install the printer - driver for mac
View all Brother International HL-6180DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Wired Network Macintosh For Wired Network Interface Cable Users for Macintosh 9 Before you install 10 Install the printer driver a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Important For users of Mac OS X 10.5.7 or lower, upgrade to Mac OS X 10.5.8 - 10.7.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.) Note If you want to add the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and visit FAQ's on your model page for instructions. b Remove the protective cap from the Ethernet port marked with a symbol. a Put the installer CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. If prompted, select your model. c Choose Wired Network Connection (Ethernet) and then click Next. Follow the on-screen instructions. Note It may take a few minutes for the installation to complete. d Choose your machine from the list, and then click OK. Windows® Macintosh Wired Network c Connect the network interface cable to the Ethernet port, and then connect it to a free port on your hub. d Make sure your machine's power switch is on. Note • If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name. • You can find your machine's MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 31. 15