Brother International HL-L6300DW Online Users Guide HTML - Page 273
Error Messages, Cause, Action, Username, Password, Authentication Setting, Cancel, Print, Error, Detection Setting, Store, Print Log to Network
![]() |
View all Brother International HL-L6300DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
HL-L6300DW Error Messages Cause Action A device is already connected. Press [OK]. Two mobile devices are already connected to the Wi-Fi Direct network when the Brother machine is the Group Owner (G/O). After the current connection between your Brother machine and another mobile device has shut down, try to configure the Wi-Fi Direct settings again. You can confirm the connection status by printing the Network Configuration Report. Authentication error, contact your administrator. Your authentication setting for the Store Print Log to Network feature is not correct. • Make sure the Username and Password in Authentication Setting are correct. If the username is part of a domain, enter the username in one of the following styles: user@domain or domain\user. • Make sure the SNTP time server settings are configured correctly so the time matches the time used for authentication by Kerberos or NTLMv2. Check User ID and The Kerberos Authentication Password. error. Make sure you have entered a correct user name and a password for the Kerberos server. For more information on the Kerberos server settings, contact your network administrator. The date, time and time zone Confirm your machine's date, time and time zone settings of the Brother machine settings. are not correct. The DNS server configuration is Contact your network administrator for the information on not correct. the DNS server settings. The Brother machine cannot Contact your network administrator for the information on connect to the Kerberos server. the Kerberos server settings. Connection Error Other devices are trying to connect to the Wi-Fi Direct network at the same time. Make sure there are no other devices trying to connect to the Wi-Fi Direct network, and then try to configure the Wi-Fi Direct settings again. Connection Failed The Brother machine and your mobile device cannot communicate during the Wi-Fi Direct network configuration. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are using the PIN Method of WPS, make sure you have entered the correct PIN. File access error, The Brother machine cannot • contact your administrator. access the destination folder for • the Store Print Log to Network feature. • Make sure the stored directory name is correct. Make sure the stored directory is write-enabled. Make sure the file is not locked. Log Access Error In Web Based Management, you have selected the Cancel Print option in the Error Detection Setting of Store Print Log to Network. Wait for about 60 seconds until this message disappears from the LCD. No Device When configuring the Wi-Fi Direct network, the Brother machine cannot find your mobile device. • Make sure your machine and mobile device are in the Wi-Fi Direct mode. • Move the mobile device closer to your Brother machine. • Move your Brother machine and the mobile device to an obstruction-free area. • If you are manually configuring the Wi-Fi Direct network, make sure you have entered the correct password. • If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. 268
![](/manual_guide/products/brother-international-hll5000d-online-users-guide-html-8b0d713/273.png)