Brother International HL-L9310CDW Online Users Guide HTML - Page 346
Level 3, Descriptions, WPS w/ PIN Code
View all Brother International HL-L9310CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
Level 3 Wired LAN WLAN Level 4 Wired Enable TCP/IP Level 5 Boot Method IP Address Subnet Mask Gateway Node Name WINS Configuration WINS Server DNS Server IP Boot Tries APIPA Setup Wizard IPv6 - WLAN Assistant - WPS - WPS w/ PIN Code - WLAN Status Status Signal SSID Comm. Mode MAC Address - Set to Default - WLAN Enable - Wi-Fi Direct Push Button - Level 6 - - Descriptions Turn the wired interface on or off. Choose the IP method that best suits your needs. Enter the IP address. Enter the Subnet mask. Enter the Gateway address. Enter the Node name. Select the WINS configuration mode. Primary Specify the IP address of the primary WINS server. Secondary Specify the IP address of the secondary WINS server. Primary Specify the primary DNS server's IP address. Secondary Specify the secondary DNS server's IP address. - Specify the number of attempts the machine will try to obtain an IP address when the Boot Method is set to any setting except Static. - Allocate the IP address from the link- local address range automatically 1. - Enable or disable the IPv6 protocol. - Configure the wireless network settings using the setup wizard. - Configure your wireless network settings using the Brother installation disc. - Configure your wireless network settings using the one-button push method. - Configure the wireless network settings using WPS with a PIN code. - Display the wireless Ethernet link status. - Display the signal condition. - Display SSID. - Display the current Communication Mode. - Display the MAC address of the machine. - Restore wireless network settings of your machine to the factory settings. - Turn the wireless interface on or off. - Configure your Wi-Fi Direct network settings using the one-button push method quickly. 341