Brother International HL-L9310CDW Online Users Guide HTML - Page 84
Devices and Printers, Hardware and Sound
![]() |
View all Brother International HL-L9310CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2 Routers or access points that support WPS are marked with this symbol: 1. Press [Settings] > [All Settings] > [Network] > [WLAN] > [WPS w/ PIN Code]. 2. When [Enable WLAN?] appears, press [Yes]. This will start the wireless setup wizard. To cancel, press [No]. 3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router. 4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device you are using as the Registrar. (For example: http://192.168.1.2) 5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions. • The Registrar is usually the wireless LAN access point/router. • The settings page will differ depending on the brand of wireless LAN access point/router. For more information, see the instructions supplied with your wireless LAN access point/router. If you are using a Windows® 7, Windows® 8, or Windows® 10 computer as a Registrar, complete the following steps: 6. Do one of the following: • Windows® 7 Click (Start) > Devices and Printers > Add a device. • Windows® 8 Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings > Control Panel > Hardware and Sound > Devices and Printers > Add a device. • Windows® 10 79
![](/manual_guide/products/brother-international-hll9310cdw-online-users-guide-html-1fbfc62/84.png)