Brother International Innov-is NQ1700E Operation Manual - Page 58

Troubleshooting Error messages The wireless security information (Authentication method, Encryption method, Network Key) is incorrect. 23 24 The wireless setting is not activated. 25 This pattern cannot be used. 26 This USB media cannot be used. 27 USB media is not loaded. Load USB media. 28 F** Cause/solution The wireless security information (authentication method/encryption method/ network key (password)) is incorrect. Refer to the table for the [The authentication and encryption methods used by the selected wireless LAN access point/router are not supported by your machine.] error message, and reconfirm the wireless security information (authentication method/encryption method/network key (password)). (page 14) Refer to "How can I find the wireless security information (SSID and network key)" on page 56. The wireless network setting is not activated. Activate the wireless network. (page 14) This message appears when you try to retrieve a pattern that cannot be used with this machine. This message is displayed when you try to use incompatible media. This message is displayed when you try to recall or save a pattern while no USB flash drive is loaded. If error message [F**] appears in the LCD while the machine is being used, the machine may be malfunctioning. Contact your authorized Brother dealer or the nearest Brother authorized service center. How can I find the wireless security information (SSID and network key) 1) You should see the documentation provided with your wireless access point/router. 2) The default SSID (wireless network name) could be the manufacturer's name or the model name. 3) If you do not know the security information, please consult the router manufacturer, your system administrator, or internet provider. 4) Some Wireless SSIDs and network keys (passwords) are case (upper case and lower case) sensitive. Please properly record your information. * The network key may also be described as a password, security key or encryption key. * If the wireless access point/router is not broadcasting the SSID, the SSID will not automatically be detected. You will have to manually enter the SSID. 1 SSID 2 Network key (password) a b Operation beeps If a correct operation is performed, the machine beeps one time. If an incorrect operation is performed, the machine beeps two or four times. If the machine locks up, for example, because the thread is tangled, the machine continues to beep for four seconds, and then the machine automatically stops. Be sure to check for the cause of the error, and correct it before continuing to embroider. 56