Brother International Innov-is NQ1700E Operation Manual - Page 59
Specifications, Updating Your Machine's Software
View all Brother International Innov-is NQ1700E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Specifications Specifications Item Dimensions of machine Weight of machine Dimensions of machine with embroidery unit attached Weight of machine with embroidery unit attached Sewing speed Specification Approx. 480 mm (W) × 250 mm (D) × 300 mm (H) (Approx. 18-7/8 inches (W) × 9-7/8 inches (D) × 11-7/8 inches (H)) For 888-G60: Approx. 8.6 kg (Approx. 20 lb) For 888-G70/G72: Approx. 8.7 kg (Approx. 20 lb) Approx. 693 mm (W) × 421 mm (D)× 300 mm (H) (Approx. 27-3/8 inches (W) × 16-5/8 inches (D) × 11-7/8 inches (H)) For 888-G60: Approx. 12.1 kg (Approx. 27 lb) For 888-G70/G72: Approx. 12.2 kg (Approx. 27 lb) 70 to 850 stitches per minute * Please be aware that some specifications may change without notice. Updating Your Machine's Software The machine's software can be updated using USB flash drive. When an update program is available on the Brother support website at " http://s.brother/cphan ", please download the file(s) following the instructions on the website and steps listed below. Note • When using USB flash drive to update the software, check that no data other than the update file is saved on the USB flash drive being used before starting to update. Memo • When the machine's software is updated, saved embroidery patterns will not be erased. When using the wireless function, the update mark is displayed on the wireless LAN key. : Updated software is available on our website. Update the software. : No updated software is available. Version information can be checked from the settings screen. (page 13) Turn on the machine while pressing and holding a (Presser foot lifter button). APPENDIX 3 The following screen appears. Insert the USB flash drive into the USB port on the b machine. Note • Save only the update file on the USB media. Press . c • Do not turn off the machine during the update. When updating is finished, the completion message appears. Remove the USB flash drive, and turn the machine off d and on again. 57