Brother International IntelliFAX-2940 Basic Users Guide - English - Page 82
Start, Error Message, Cause, Action, Cover is Open, Disconnected, Document Jam, DR Mode in Use
View all Brother International IntelliFAX-2940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Error Message Cover is Open Disconnected Document Jam DR Mode in Use Drum Error Drum Stop EL Error Fuser Error Cause Action The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power. Close the fuser cover of the machine. Make sure paper is not jammed inside the back of the machine, and then close the fuser cover and press Start. The other person or other Try to send or receive again. person's fax machine stopped the call. The document was not inserted or fed properly, or the document scanned from the ADF was too long. See Document was not inserted or fed properly, or was too long uu page 75 or Using the automatic document feeder (ADF) uu page 22. The machine is set to Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. (See Distinctive Ring uu page 34.) The corona wire on the drum unit Clean the corona wire on the drum unit. needs to be cleaned. (See Cleaning the corona wire uu page 60.) It is time to replace the drum unit. Replace the drum unit. (See Replacing the drum unit uu page 62.) The machine has a mechanical Open the front cover and close it again. problem. The temperature of the fuser unit does not rise to a specified temperature within the specified time. The fuser unit is too hot. (For FAX-2840 and MFC-7240 ) Received fax messages still in memory will be lost when the machine is turned off. See Transferring your faxes or Fax Journal report uu page 74 before disconnecting the machine so you will not lose any important messages. Then, turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. (For FAX-2940) Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power on. 70