Brother International KE-430F Basic Instruction Manual - English - Page 20

Installing the control box, 4-3. Installing the oiler, Wood screws [2 pcs]

Get Brother International KE-430F PDF manuals and user guides View all Brother International KE-430F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

4. INSTALLATION 4-2. Installing the control box Remove the six screws (1), and then remove the control box cover (2). (3) Control box (4) Bolts [4 pcs] (5) Plain washers [4 pcs] (6) Spring washers [4 pcs] (7) Nuts [4 pcs] 4-3. Installing the oiler Center 2280B Before installing the oiler, provisionally install the rubber cushion (1) and the hinge holder (2) to the table with the two bolts (3). (4) Dust oiler setting plate (5) Dust oiler (6) Screws [2 pcs] (7) Wood screws [2 pcs] (8) Oiler * Install the dust oiler setting plate (4) so that the hole (9) in the dust oiler setting plate (4) is in the center of the hole (10) in the table for installing the oiler (8) as shown in figure [A]. NOTE: • Make sure that the dust oiler setting plate (4) does not interfere with the hinge holder (2). 2281B 12 KE-430F, BE-438F

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
4. INSTALLATION
12
KE-430F, BE-438F
4-2. Installing the control box
Remove the six screws (1), and then
remove the control box cover (2).
(3) Control box
(4) Bolts [4 pcs]
(5) Plain washers [4 pcs]
(6) Spring washers [4 pcs]
(7) Nuts [4 pcs]
4-3. Installing the oiler
Before installing the oiler, provisionally
install the rubber cushion (1) and the
hinge holder (2) to the table with the two
bolts (3).
(4) Dust oiler setting plate
(5) Dust oiler
(6) Screws [2 pcs]
(7) Wood screws [2 pcs]
(8) Oiler
* Install the dust oiler setting plate (4) so
that the hole (9) in the dust oiler setting
plate (4) is in the center of the hole (10)
in the table for installing the oiler (8) as
shown in figure [A].
NOTE:
• Make sure that the dust oiler setting
plate (4) does not interfere with the
hinge holder (2).
2280B
2281B
Center