Brother International KE-430F Basic Instruction Manual - English - Page 31
INSTALLATION, <200 V system >, the cords are being clamped by
 |
View all Brother International KE-430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Operator 4. INSTALLATION (1) Power switch (2) Screws [2 pcs] 4145M 2347B (3) 3-pin power supply connector (4) Power cord (5) Staples [5 pcs] 1. Attach an appropriate plug to the power cord (4). (The green and yellow wire is the ground wire.) 2. Insert the power plug into a properly-grounded electrical outlet. NOTE: • Take care when tapping in the staples (5) to make sure that they do not pierce the cords. • Do not use extension cords, otherwise machine operation problems may result. 3. Use the six screws to tighten the cover of the control box. Check that none of the cords are being clamped by the cover at this time. Green and yellow wire (ground wire) KE-430F, BE-438F 23
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
 |
 |
4. INSTALLATION
23
KE-430F, BE-438F
<200 V system >
(1) Power switch
(2) Screws [2 pcs]
(3) 3-pin power supply connector
(4) Power cord
(5) Staples [5 pcs]
1. Attach an appropriate plug to the
power cord (4). (The green and yellow
wire is the ground wire.)
2. Insert
the
power
plug
into
a
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the staples
(5) to make sure that they do not pierce
the cords.
• Do not use extension cords, otherwise
machine
operation
problems
may
result.
3. Use the six screws to tighten the cover
of the control box. Check that none of
the cords are being clamped by the
cover at this time.
4145M
2347B
Green and yellow wire
(ground wire)
Operator