Brother International KE-430F Basic Instruction Manual - English - Page 49
Checking the sewing pattern (KE-430F), Once the test feed reaches the final stitch, the work
View all Brother International KE-430F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
6. USING THE OPERATION PANEL (BASIC OPERATIONS) 6-4. Checking the sewing pattern (KE-430F) Use test feed mode to check the needle movement with only the work clamp operating. Check that the needle hole does not come out from the frame of the work clamp. 1 1. Press the TEST key. • The number of stitches remaining until the final stitch will be displayed in the menu display. TEST indicator lights 2416B 2. Press the or key (1) to set the program number that you would like to check. For example, program number 2 If the PROGRAM No. display is flashing, depress the foot switch to the 2nd step. ・ The feed mechanism will move to the home position and the program number will change from flashing to illuminated. 2nd step Program No. flashes Æ illuminates 2415B 4441Q 2 Start continuous test feed mode. Depress the foot switch to the 2nd step and then release it. ・ The work clamp will start moving continuously one stitch at a time. (The stitch number display will be decremented by one stitch at a time.) ・ The TEST indicator will flash. 4441Q [Test interrupt mode] 2nd step [Fast-forward test mode] If you depress the foot switch to the 1st step while the work clamp is moving, the feeding speed will become faster while the foot switch is being depressed. If you would like the work clamp to stop moving, press the TEST key. ・ When the foot switch is depressed to the 2nd step, the work clamp will start moving again. TEST indicator flashes [Paused sewing standby mode] 2nd step If you would like sewing to resume from the point where it was paused, press the TEST key while test feeding is paused to switch off the TEST indicator. ・ When you depress the foot switch to the 2nd step, sewing will start. TEST indicator switches off 2404B 2416B 4441Q ・ If you press the key (2) while in this mode, the work clamp will move forward by one stitch, and if you press the key (3), the work clamp will move back by one stitch. (It will move quicker if you keep the key pressed down.) ・ If you press the RESET key, the work clamp will return to the sewing start position. 2417B 3 Once the test feed reaches the final stitch, the work Press the TEST key. clamp stops moving. TEST indicator switches off 2404B 4 1st step Depress the foot switch to the 1st step. The work clamp will rise and the preparation for sewing will be completed. KE-430F, BE-438F 4441Q 41