Brother International MFC 7345N Network Users Manual (Internet Fax and Fax to - Page 26
IP Address, Subnet Mask, Wired, TCP/IP, Change
UPC - 012502622239
View all Brother International MFC 7345N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Control panel setup IP Address 3 This field displays the current IP address of the machine. If you have chosen a BOOT Method of Static, enter the IP address that you wish to assign to the machine (check with your network administrator for the IP address to use). If you have chosen a method other than Static, the machine will attempt to determine its IP address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be incompatible with the IP address numbering scheme of your network. We recommend that you contact your network administrator for an IP address for the network the unit will be connected on. 3 a Press Menu. b Press a or b to choose LAN. Press OK. (MFC-7440N and MFC-7840N) Go to d. (MFC-7840W) Go to c. c (MFC-7840W only) (For Wired) Press a or b to choose Wired. (For Wireless) Press a orb to choose WLAN. Press OK. d Press a or b to choose TCP/IP. Press OK. e Press a or b to choose IP Address. Press OK. f Press 1 to choose Change. g Enter the IP address. Press OK. h Press Stop/Exit. Subnet Mask 3 This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet mask to use. a Press Menu. b Press a or b to choose LAN. Press OK. (MFC-7440N and MFC-7840N) Go to d. (MFC-7840W) Go to c. c (MFC-7840W only) (For Wired) Press a or b to choose Wired. (For Wireless) Press a orb to choose WLAN. Press OK. 19