Brother International MFC-8680DN Network Users Manual - English - Page 133
Restoring the network settings to factory default, Printing the Network Configuration List, Start
View all Brother International MFC-8680DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Control panel setup Restoring the network settings to factory default 6 If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps: Note This function restores all wired and wireless network settings to the factory default. a Press Menu. b Press a or b to choose Network. Press OK. c Press a or b to choose Network Reset. Press OK. d Press 1 to choose Reset. 6 e Press 1 to choose Yes for reboot. f The machine will re-start. You can now reconnect the network cable and configure the network settings to work with your network. Printing the Network Configuration List 6 Note Node name: Node name appears on the Network Configuration List. The default node name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network. ("xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.) The Network Configuration List prints a report listing all the current network configuration including the network print server settings. a Press Menu. b (For MFC model) Press a or b to choose Print Reports. (For DCP model) Press a or b to choose Machine Info.. Press OK. c Press a or b to choose Network Config. Press OK. d Press Start. Note If the IP Address on the Network Configuration List shows 0.0.0.0, wait for one minute and try again. 123