Brother International MFC-8680DN Network Users Manual - English - Page 78
Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW),
View all Brother International MFC-8680DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
5 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW) 5 Configuration in Infrastructure mode 5 Before configuring the wireless settings 5 IMPORTANT • The following instructions will install your Brother machine in a network environment using the Brother installer application for Macintosh found on the CD-ROM we have provided with the machine. 5 • You can also setup your Brother machine using the machine's control panel which we recommended. You can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network (For MFC-8890DW) on page 21. • You must know your wireless network settings before you proceed with this installation. Make sure you take notes on all the current settings such as SSID, authentication and encryption of your wireless network environment. If you do not know them, contact your network administrator or the manufacturer of your access point/router. Check and record the current wireless network settings. Network name:(SSID, ESSID) Communication Mode Infrastructure Authentication method Open system Shared key WPA/WPA2-PSK 1 LEAP EAP-FAST/NONE EAP-FAST/MS-CHAPv2 EAP-FAST/GTC Encryption mode WEP 2 NONE WEP 2 AES TKIP 3 CKIP AES TKIP Network key 4 - 68