Brother International MFC-9200C Users Manual - English - Page 111

Color Adjustment 1 Press Function, 5, 5. 2 Press or to select RED, Light Dark GREEN or BLUE and press Set. R:- + 3 Press or to adjust the degree of color and press Set. G:- + 4 Return to Step 2 to select the next B:- + color-OR-Press Stop to exit. Color Enhancement 1 Press Function, 5, 6. 2 Press or to select WHITE BALANCE and press Set. To skip White Balance, press to select SHARPNESS or COLOR DENSITY. 3 Press or to adjust the degree of White Balance and press Set. 4 Repeat Step 2 and Step 3 to adjust the degree of Sharpness and Color Density -OR-Press Stop to exit. s White Balance This setting adjusts the hue of the white sections of an image. Lighting, camera settings and other influences will effect the appearance of white. The white parts of a picture may appear to be slightly pink, yellow or some other color. By using this adjustment you can correct this effect and bring the white sections back to pure white. s Sharpness This setting enhances the detail of an image. It is similar to adjusting the fine focus on a camera. If the focus is off a small amount, you can not clearly see the fine details of an image. s Color Density This setting adjusts the total amount of color in the image. You can increase or decrease the amount of color in an image to improve a picture that may appear washed out or weak. Understand Error Messages Once you are familiar with the types of errors that might occur while you're using the PhotoCapture Center™, you can easily identify and troubleshoot difficulties. When an error message appears on the LCD, the MFC will beep to get your attention. MEDIA ERROR-This message appears when you insert a media card that is either bad or not formatted, or if there is a problem with the media drive. To clear this error, remove the media card. W A L K - U P P H O T O C A P T U R E C E N T E R ™ 12 - 8