Brother International MFC-9200C Users Manual - English - Page 129
Using a USB Cable to Connect the MFC to the PC (Using Windows® 98, 98SE, ME and Windows® 2000 Pro
View all Brother International MFC-9200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
22 Click OK. All the drivers have been installed. Now you can print and scan. Note If you want to install PaperPort®, MFL Pro, go to the CD section. (See Installing the Brother Software, page 13-27.) Using a USB Cable to Connect the MFC to the PC (Using Windows® 98, 98SE, ME and Windows® 2000 Professional Only) IMPORTANT To install the software using Windows® 2000 Professional, you must be logged on as the Administrator. Note Before you can connect the MFC to your computer, you must purchase a USB cable that is no longer than 6 feet (1.8 meters). Note If you are using a bi-directional IEEE-1284 compliant parallel cable, see Using a bi-directional IEEE-1284 compliant parallel cable to Connect the MFC to the PC, page 13-2. 1 After you have set up the MFC and checked that it is working properly, make sure that your PC is turned off. 2 Connect the USB cable to both the MFC and the PC. 3 Turn on your PC. Note Please follow the instructions for the operating system you are using. Note Now begin the installation of the Brother Drivers: s If you are using Windows® 98, 98SE, ME, go to Step 4. s If you are using Windows® 2000 Professional, go to page 13-24. S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R 13 - 17