Brother International MFC-J4710DW Network Users Manual - English - Page 31
For DCP-J4110DW, MFC-J2310/J4310DW/J4410DW/J4610DW, For example, SSID Network Name, Communication Mode
View all Brother International MFC-J4710DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Configuring your machine for a wireless network (For DCP-J4110DW, MFC-J2310/J4310DW/J4410DW/J4610DW) 3 a Before configuring your machine we recommend you write down your wireless network settings. You will need this information before you continue with the configuration. Check and record the current wireless network settings. SSID (Network Name): 3 Communication Mode Infrastructure Authentication method Open system Shared key WPA/WPA2-PSK Encryption mode WEP NONE WEP AES TKIP 1 1 TKIP is supported for WPA-PSK only. For example: SSID (Network Name): HELLO Network key - Communication Mode Infrastructure Authentication method Encryption mode WPA2-PSK AES Network key 12345678 NOTE If your access point/router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. b Press Settings. c Press s or t to display Network and then press Network. d Press WLAN. e Press Setup Wizard. f When Network I/F switched to Wireless is displayed, press Yes to accept. This will start the wireless setup wizard. To cancel, press No. g The machine will search for your network and display a list of available SSIDs. Press s or t to display , and press . h Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.) Press OK. 25