Brother International MFC-J6530DW Basic Users Guide - Page 24
Load Letter or A4 Size Paper in Paper Tray #1 / Paper Tray #2, Paper Size and Paper Type settings if
View all Brother International MFC-J6530DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Load Letter or A4 Size Paper in Paper Tray #1 / Paper Tray #2 (MFC-J6730DW) When you load paper in Tray #2, remove the tray top cover (1). • If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size and Paper Type settings if needed, following the LCD instructions. • Load only one size and type of paper in the paper tray at a time. • When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer. Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select has been set in the machine or printer driver. (MFC-J6730DW) These instructions describe how to load paper in Tray #1. The steps for Tray #2 are very similar. (MFC-J6730DW) 1 2 Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size. Make sure the triangular mark (3) on the paper width guide (1) and paper length guide (2) line up with the marks for the paper you are using. 1 3 1 Pull the paper tray completely out of the machine as shown by the arrow. 3 2 3 Fan the stack of paper well to avoid paper jams and misfeeds. 10