Brother International MFC-J6530DW Basic Users Guide - Page 62
If you cannot print on both sides of paper, check the following, connection again.
View all Brother International MFC-J6530DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
• Change the LAN cable for a new one. • Use a different LAN port on your hub. • Make sure your machine's wired connection is on. For a wireless network connection: • Confirm your machine's wireless status on the LCD. Your machine is not connected to the wireless access point. Set up the wireless network connection. The wireless connection setting is disabled. Enable the WLAN connection and set up the wireless network connection. The wireless access point cannot be detected. Set up the wireless network connection again. The wireless network is connected. A three-level indicator in the LCD displays the current wireless signal strength. You can configure wireless settings by pressing the wireless status button. If you cannot print on both sides of paper, check the following: 6 Change the paper size setting in the printer driver to Letter. 48