Brother International MFC-J6945DW Online Users Guide HTML - Page 542
Error Message, Cause, Action, You can still scan even if the ink is, low or needs to be replaced.
View all Brother International MFC-J6945DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 542 highlights
Error Message Repetitive Paper Jams Replace Ink The maximum number of devices are already connected using Wi-Fi Direct. Touchscreen Initialization Failed Tray #1 Settings Tray #2 Settings MP Tray Settings Unable to Clean XX Unable to Initialize XX Unable to Print XX Unable to Scan XX Cause Action See Related Information: Clean the Paper Pick-up Rollers. A foreign object, such as a paper clip or a piece of ripped paper, is in the machine. Remove any foreign objects and paper scraps in the machine. See Related Information: Remove Paper Scraps. One or more of the ink cartridges have reached the end of their lives. The machine will stop all print operations. While memory is available, black and white faxes will be stored in the memory. If the sending machine has the ability to convert it, the color fax will be stored in the memory as a black and white fax. Replace the ink cartridges. See Related Information: Replace the Ink Cartridges. • You can still scan even if the ink is low or needs to be replaced. The maximum number of mobile devices are already connected to the Wi-Fi Direct network when the Brother machine is the Group Owner (G/O). After the current connection between your Brother machine and another mobile device has shut down, try to configure the Wi-Fi Direct settings again. You can confirm the connection status by printing the Network Configuration Report. See Related Information: Print the Network Configuration Report. The touchscreen was pressed before the power on initialization was completed. Make sure nothing is touching or resting on the touchscreen, especially when plugging the machine in. Debris may be stuck between the lower part of the touchscreen and its frame. Insert a piece of stiff paper between the lower part of the touchscreen and its frame and slide it back and forth to push out the debris. This message is displayed when the setting to confirm the paper type and size is enabled. To not display this confirmation message, change the setting to Off. See Related Information: Change the Check Paper Size Setting. The machine has a mechanical problem. -OR- A foreign object, such as a paper clip or a piece of ripped paper, is in the machine. Open the scanner cover and remove any foreign objects and paper scraps from inside the machine. If the error message continues, disconnect the machine from the power for several minutes, and then reconnect it. You can try additional paper jam clear operations. See Related Information: Remove Paper Scraps. (If you cannot print received faxes, transfer them to another fax machine or to your computer.) See Related Information: Transfer Your Faxes or Fax Journal Report. The machine has a mechanical problem. Disconnect the machine from the power for several minutes, and then reconnect it. (If you cannot print received faxes, transfer them to another fax machine or to your computer.) See Related Information: Transfer Your Faxes or Fax Journal Report. 534