Brother International MFC-J895DW Reference Guide - Page 21

Error Message Action Data Remaining in Press . The machine will cancel the job and clear it from the Memory memory. Try to print again. Disconnected Try to send or receive again. If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP). See Related Information: Telephone Line Interference/VoIP at the end of this section. Document Jam/too The document was not inserted or fed correctly, or the document Long scanned from the ADF was too long. For more detailed information, see the Online User's Guide: Document Jams. DR Mode in Use The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode. Set Distinctive Ring to Off. For more detailed information, see the Online User's Guide: Turn off Distinctive Ring. High Temperature After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down. Hub is Unusable. Hubs, including a USB flash drive with a built-in hub, are not supported. Unplug the device from the USB direct interface. Ink Absorber NearFull The ink absorber box must be replaced soon. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. • The ink absorber box absorbs the small amount of ink emitted during print head cleaning. Ink Absorber Pad The ink absorber box must be replaced. Call Brother Customer Service Full or a Brother Authorized Service Center to have your machine serviced. Ink Low One or more of the ink cartridges are near the end of their lives. Order a new ink cartridge. You can continue printing until the touchscreen displays Replace Ink. For more detailed information, see the Online User's Guide: Replace the Ink Cartridges. • You can still scan even if the ink is low or needs to be replaced. 20