Brother International MFC-L8850CDW Advanced Users Guide - Page 97
Optional paper tray (For MFC-L8600CDW and MFC-L8850CDW (LT-320CL)) (For MFC-L9550CDW (LT-325CL))
View all Brother International MFC-L8850CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Optional paper tray (For MFC-L8600CDW and MFC-L8850CDW (LT-320CL)) (For MFC-L9550CDW (LT-325CL)) B An optional lower tray can be installed on the MFC-L8600CDW, MFC-L8850CDW and MFC-L9550CDW, and it can hold up to 500 sheets of 20 lb (80 g/m2) paper. When an optional tray is installed, the machine can hold up to 800 sheets of plain paper. For setup, see the instructions that we have supplied with the lower tray unit. WARNING If you use a Lower Tray, DO NOT carry the machine with the Lower Tray. You may injure yourself or cause damage to the machine because the Lower Tray is not securely attached to the machine. Options Memory board B Your machine has 256 MB of standard memory and one slot for optional memory expansion. You can increase the memory up to maximum of 512 MB by installing one SODIMM (Small Outline Dual In-line Memory Module). SO-DIMM Types B For information regarding memory for your Brother machine please visit: http://www.brother-usa.com/support/memory/. In general, the SO-DIMM must have the following specifications: Type 144-pin and 16-bit output CAS latency 4 Clock frequency 267 MHz (533 Mb/S/Pin) or more Capacity 256 MB Height 1.18 in. (30.0 mm) B DRAM type DDR2 SDRAM NOTE • There might be some SO-DIMMs that will not work with the machine. • For more information, call the dealer you bought the machine from or Brother Customer Service. 91