Brother International PE535 Operation Manual - Page 19
through the eye of the needle.
View all Brother International PE535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Lower the needle threader lever on the left side of the o machine as much as possible to make the hook turn. 1 2 3 1 Needle threader lever 2 Needle 3 Hook Note • If the needle is not raised to it's highest position, the needle threader cannot thread the needle. Turn handwheel counterclockwise until the needle is at its highest position. The needle is correctly raised when the mark on the handwheel is at the top, as shown under step c on page 15. Raise the needle threader lever slowly. p Carefully pull the end of thread that was passed q through the eye of the needle. If the needle was not completely threaded, but a loop in the thread was formed in the eye of the needle, carefully pull the loop through the eye of the needle to pull out the end of the thread. Raise the presser foot lever, pass the end of the thread r through and under the presser foot, and then pull out about 5 cm (approx. 2 inches) of thread toward the rear of the machine. Press s to unlock all keys and buttons. Upper Threading 1 17 GETTING READY