Brother International PT 1650 Users Manual - English - Page 66
Appendix, Troubleshooting, - model
UPC - 012502607366
View all Brother International PT 1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
6 Appendix Troubleshooting Problem 1 The display stays blank after you have turned on the machine. 2 The machine does not print or the printed characters are blurred. 3 The text files that you stored in the memory are no longer there. 4 The printed characters are not formed properly. 5 A blank horizontal line appears through the printed label. 6 Striped tape appears. 7 The P-touch has "locked up" (i.e., nothing happens when a key is pressed). 58 Solution • Check that the AC adapter (model AD-60) is connected correctly. • If you are using batteries, check that they are correctly inserted. • If the batteries are low, replace them with new ones. • Check that the back cover has been properly attached. • If the tape cassette is empty, replace it with a new one. • If the batteries are low, replace them with new ones. • If you are using batteries, they may have a low charge. Try using the AC adapter or replace the batteries with new ones. • Clean the print head as explained on Cleaning the print head, rollers and tape cutter on page 8. • You have reached the end of the tape. Replace the tape cassette with a new one. • Turn off the P-touch, and then while holding down g and R, turn the machine back on. The machine will restore, but the text and formats shown in the display and all text files stored in the memory are erased.