Brother International PT1500PC Users Manual - English - Page 13

For Macintosh 5 If "Replace with new Brother PT-1500PC" or "Add Brother PT-1500PC" was selected: A dialog box appears, instructing you to connect the PT-1500PC to the computer. Connect the PT-1500PC to the computer using the enclosed USB interface cable as described on page 5, and then turn on the PT-1500PC. A dialog box appears, showing that the printer driver has been installed. Select "Yes, restart immediately.", and then click the Finish button to restart the computer. If "Delete Brother PT-1500PC" was selected: A dialog box appears, asking for confirmation to delete all PT-1500 printer drivers. Click the Yes button. A dialog box appears, showing that the printer drivers have been deleted. Click the Finish button. If a dialog box appears, explaining that the computer should be restarted, select the option for restarting the computer, and then click the Finish button. For Macintosh users Before labels can be printed on the PT-1500PC, label-designing software and the PT-1500PC printer driver must be installed. In order to design labels that can be printed on the PT-1500PC, two applications are available on the enclosed CD-ROM: P-touch Quick Editor and P-touch Editor Ver. 3.1 Before installation Check that your system configuration meets the following requirements. Computer: Macintosh Operating system: Mac OS 8.6 or later * This software is only compatible with Mac OS X classic. The Mac version of the software is for a Mac with an English operating system. If the software is installed on a Mac with an operating system in a different language, the software may not run properly. Hard disk free space: At least 30 MB A few hundred megabytes of additional free space may be needed when printing long labels or large amounts of data. Available memory free space: Minimum 24 MB USB port CD-ROM drive 11