Brother International QL-1050N Users Manual - English - Page 40

Introduction Maintenance Maintenance of the machine may be carried out as required. However, some environments require that maintenance must be done more frequently (e.g. in dusty conditions). Print head maintenance The DK Roll (thermal printing paper type) used with the machine is designed to clean the print head automatically. When the DK Roll Print head passes the print head during printing and label feeding, the print head Roller is cleaned. If the print head is not cleaned enough, use a cotton swab and wipe the head. Roller maintenance Cut the DK label and remove the backing paper of the label. Then, put the adhesive side of the label against the roller and remove the dirt. Label outlet maintenance If a label causes the machine to jam due to glue attached to the label outlet, remove the power cord and clean the label outlet with a cloth dipped into ethanol or isopropyl alcohol. Label outlet Creating Labels Appendix 40 Print head maintenance