Brother International RJ-3050Ai ESC/ P Command Reference - Page 44
ESC X, Specify character size
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
ESC/P Command Reference ESC X Specify character size ASCII: ESC X Decimal: 27 88 Hexadecimal: 1B 58 m nL nH m nL nH m nL nH Parameters Character width: The value of m is irrelevant. Character size: Valid only with: nL=16, 24, 32 dots nH=0 The maximum is: nL=144 nH=1 Description This command is used only to change the size. Outline must not be specified. The character width cannot be specified. The character size is specified as n=nL+nH*256 dots. With bitmap fonts, only n=16, 24 and 32 are valid. With outline fonts, n=400 is the maximum. The commands for specifying stretched characters, compressed characters and the character spacing (SO, ESC W, ESC !, ESC SP) remain available. Example For "ABC" at a 24-dot size and "DEF" at a 48-dot size: Code: ESC k 01h ESC X 00h 18h 00h ABC ESC k 09h ESC X 00h 30h 00h DEF FF DEF Print result: ABC - 38 - 5. Control Command Details