Brother International RJ-3050Ai ESC/ P Command Reference - Page 85
ESC i P, QR Code version
![]() |
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
(3) \\\: End of barcode There must be three backslashes to end 2D barcode. Example Refer to the section "Summary". ESC/P Command Reference ESC i P QR Code version ASCII: ESC i P n Decimal: 27 105 80 n Hexadecimal: 1B 69 50 n Parameters 0≤n≤40 Description The barcode size can be fixed. The default value is 0. The available versions differ depending on the symbol type used. If a setting other than those listed is specified, the setting returns to its default. The following settings are available for each symbol type. Model1 (0-14), Model2 (0-40), MicroQR (0-4) - 79 - 5. Control Command Details
![](/manual_guide/products/brother-international-rj3050-esc-p-command-reference-846bf74/85.png)
ESC/P Command Reference
- 79 -
5. Control Command Details
(3)
\\\:
End of barcode
There must be three backslashes to end 2D barcode.
Example
Refer to the section
“
Summary
”
.
ESC i P
QR Code version
ASCII:
ESC
i
P
n
Decimal:
27
105
80
n
Hexadecimal: 1B
69
50
n
Parameters
0
≤
n
≤
40
Description
The barcode size can be fixed.
The default value is 0.
The available versions differ depending on the symbol type used.
If a setting other than those listed is specified, the setting returns to its default.
The following settings are available for each symbol type.
Model1 (0
–
14), Model2 (0
–
40), MicroQR (0
–
4)