Brother International RJ-3050Ai ESC/ P Command Reference - Page 47
ESC l, Specify left margin
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
ESC/P Command Reference 5.4 Horizontal movement commands ESC l Specify left margin ASCII: ESC l n Decimal: 27 108 n Hexadecimal: 1B 6C n Parameters 0≤n≤255 0≤left margin
ESC/P Command Reference
- 41 -
5. Control Command Details
5.4 Horizontal movement commands
ESC l
Specify left margin
ASCII:
ESC
l
n
Decimal:
27
108
n
Hexadecimal: 1B
6C
n
Parameters
0
≤n≤255
0≤left margin<right margin
Description
The left margin and the right margin use the left edge of the physically printable area as the reference.
The area between the left edge of the physically printable area and the specified number of columns is
specified as an unprinted area. The left margin position is the right edge of the specified column.
(Character width*n)
The setting is in the range 0≤
(character widt
h*n) ≤
x. Settings outside that range are ignored. However, x is
a value dependent on the media.
The area between the left edge (first column) to the nth column is specified as an unprinted area.
The position of the left margin is the character width (when this command was specified)*n from the left
edge.
The character width when the margin specified includes the settings for the character spacing, full-width
character spacing or half-width character spacing. In addition, when a pitch of 10 cpi , 12 cpi or 15 cpi,
compressed characters or double-width characters are specified, that character width is considered as the
unit.
However, character styles that increase the character width are not applied.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Print area
Unprinted
area
Unprinted
area
Left margin setting
Right margin setting
Left edge
Left margin position
Right margin position
Printable area
Example:
Left margin=Column 5; right margin=Column 14
Columns
・
・