Brother International RJ-3050Ai ESC/ P Command Reference - Page 65
Select bit image <for 203dpi printers> RJ-3050/3150
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
ESC/P Command Reference 5.8 Graphics commands ESC * Select bit image (RJ-3050/3150) ASCII: ESC * m Decimal: 27 42 m Hexadecimal: 1B 2A m n1 n2 Data n1 n2 Data n1 n2 Data Parameters m=0, 1, 2, 3, 4, 6, 32, 33, 38, 39 0≤n1≤255, 0≤n2≤11 The image data is as follows: - n1+n2*256 bytes when m=0, 1, 2, 3, 4, 6 - (n1+n2*256)*3 bytes when m=32, 33, 38, 39 Description Refer to "ESC * Select bit image " for 300dpi printers. Selects and outputs a bit image according to the value of m. n1 and n2 indicate the number of dot positions. n1: The remainder from dividing the number of dot positions by 256 n2: The quotient from dividing the number of dot positions by 256 m Horizontal Dot Density Vertical Dot Density 0 60 dpi 60 dpi 1 120 dpi 60 dpi 2 120 dpi 60 dpi 3 240 dpi 60 dpi 4 80 dpi 60 dpi 6 90 dpi 60 dpi 32 60 dpi 180 dpi 33 120 dpi 180 dpi 38 90 dpi 180 dpi 39 180 dpi 180 dpi Horizontally neighboring dots are not omitted. Limitations: A maximum of 63 can be used with this command. Horizontal Dot Resolution 4/203 inch 2/203 inch 2/203 inch 1/203 inch 3/203 inch 3/203 inch 4/203 inch 2/203 inch 3/203 inch 1/203 inch Vertical Dot Resolution 4/203 inch 4/203 inch 4/203 inch 4/203 inch 4/203 inch 4/203 inch 1/203 inch 1/203 inch 1/203 inch 1/203 inch - 59 - 5. Control Command Details