Brother International RJ-3050Ai ESC/ P Command Reference - Page 9
Using ESC/P Commands
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ESC/P Command Reference 1. Using ESC/P Commands Below is a description of the flow for creating documents. Also refer to "2. Examples of Using ESC/P Commands". (1) Start ESC/P 1. Switch the command mode. - Switch command mode (ESC i a 0) Note: ESC/P mode 2. Initialize - Initialize (ESC @) (2) Format settings 1. Select the orientation. - Specify landscape orientation (ESC i L) 2. Specify the page size. - Specify page length (ESC ( C) 3. Specify print area. - Specify page format (ESC ( c) - Specify left/right margins (ESC I, ESC Q) 4. Specify the line feed amount. - Specify line feed amount (ESC 0, ESC 2, ESC 3, ESC A) 5. Specify tab positions. - Specify horizontal tab position (ESC D) - Specify vertical tab position (ESC B) (3) Print operations 1. Specify the print position. 2. Transfer the print data (one line). 3. End of the line. 4. Repeat 1-3 above. 5. End of the page. 6. Repeat 1-5 above. 7. End of the document. - Specify the vertical position (ESC ( v, ESC ( V, VT, ESC J) - Specify the horizontal position (ESC $, ESC \, HT, ESC a) - Transfer necessary text operation codes (see (4)), bit images, barcodes, and downloaded data (see (5)) - Feed the paper (CR, LF) - Specify cutting (ESC i C) - Feed the page (FF) - 3 1. Using ESC/P Commands