Brother International SE425 Operation Manual - Page 160
within the range of embroidery frame
View all Brother International SE425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
APPENDIX Symptom Probable Cause Remedy Machine does not operate when embroidery key is pressed. The embroidery unit is not attached. Attach the embroidery unit. Embroidery unit does not move. No pattern selected. The embroidery unit is not set up correctly. Select a pattern. Set the embroidery unit up correctly. The fabric is not fully stretched on the embroidery frame. The fabric is loose. Stretch the fabric properly on the embroidery frame. No stabilizer material is attached. Always use stabilizer material for embroidery. The thread is tangled and the bobbin case, etc., is plugged up. Remove the tangled thread. When the bobbin case is plugged up, clean the race. The thread tension is incorrect. Adjust the tension of the upper thread. The upper thread was not threaded correctly. Correct the upper threading. Make sure that the thread is hanged on the thread guide spring which is on the left side of the thread guide cover. The bobbin thread is incorrectly Correctly install the bobbin thread. installed. Embroidery not neatly done. Objects are placed near the carriage or embroidery frame. If the embroidery unit carriage or embroidery frame bumps into objects, the pattern will be misaligned. Do not place objects within the range of embroidery frame motion. Material coming out of the embroidery frame is causing problems. Stretch the fabric on the frame once again so that the material coming out of the embroidery frame does not cause problems, rotate the pattern and embroider. A heavy fabric is being embroidered, and the fabric is hanging off the table. If embroidery is done with the fabric hanging off the table, the embroidery unit movement will be impaired. Support the fabric while embroidering. The fabric is catching. It is pinched. Stop the sewing machine and set the fabric up correctly. The carriage was moved while the embroidery frame was being removed or attached during embroidery. If the carriage is moved during the process, the pattern may be misaligned. Be careful when removing or attaching the embroidery frame. Reference page 123 page 132 page 123 page 127 page 126 page 152 page 145 page 32, page 33 page 27 page 124 - - - 158