Brother International SE425 Operation Manual - Page 51
Selecting stitching
View all Brother International SE425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Selecting stitching Stitches are selected using LCD operations. There are 67 utility stitches. Right after turning the power on, the straight stitch (left needle position) is selected. Select a stitch. d (Previous page key) displays the previous page, and (Next page key) displays the next page. Determine the stitch to be used, and get the a matching presser foot ready. • Refer to "Stitch Setting Chart" (page 70). Attach the presser foot. b The machine comes with zigzag foot "J" attached. • For details, refer to "Replacing the presser foot" (page 43). CAUTION z Use the presser foot appropriate for the stitch. If the wrong presser foot is used, the needle may hit the presser foot and bend or break. Turn on the sewing machine. c X The straight stitch (left needle position) is shown selected on the screen. 2 Memo z When touching the screen with your finger is difficult, use the included touch pen. Example: 11 is selected: X The number of selected stitch, the stitch width and the stitch length are displayed. If necessary, specify the settings, for automatic e reverse/reinforcement stitching and adjust the stitch length, etc. • For details on sewing with each of the utility stitches, refer to "Stitch Setting Chart" (page 70). Note z When a stitch is selected, the icon for the presser foot that should be used appears on the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. Memo z For details on setting the automatic reverse/ reinforcement stitching etc., refer to "Useful Functions" (page 61). z For details on adjusting the stitch width, stitch length and thread tension, refer to "Setting the Stitch" (page 57). Sewing 49