Brother International SE425 Operation Manual - Page 93
When using zipper foot I, be sure
View all Brother International SE425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Align the seam with the center of the zipper, e and then baste the zipper in place. Select stitch 3 . h • For details, refer to "Selecting stitching" (page 49). 2 1 3 a Wrong side of fabric b Basting stitching c Zipper CAUTION ● When using zipper foot "I", be sure to select the straight stitch (center needle Remove about 5 cm (2 inches) from the end of f the basting on the outside. position), and slowly turn the handwheel toward you (counterclockwise) to check that the needle does not touch the presser 3 2 4 foot. If a different stitch is selected or the needle hits the presser foot, the needle 3 1 may bend or break. Topstitch around the zipper. i a Wrong side of fabric b Zipper basting c Outside basting d 5 mm (2 inches) Attach the presser foot holder to the right pin g of zipper foot "I". a 1 3 2 4 I b a Pin on the right side b Needle drop point • For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43). a Stitching b Right side of fabric c Basting stitching d End of zipper opening CAUTION ● When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break. Remove the basting stitching. j Zipper Insertion 91