Brother International SE425 Operation Manual - Page 83
Slide the part that you wish to sew onto
View all Brother International SE425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Fold back the fabric inside along the basting. d 2 4 3 1 1 Remove the flat bed attachment and make h free-arm sewing possible. • For details on free-arm sewing, refer to "Freearm sewing" (page 46). Slide the part that you wish to sew onto the i arm, make sure that the fabric feeds correctly, and then start sewing. a S< Seen from the side> a Wrong side of fabric b Edge of fabric c Basting d 5 mm (3/16 inch) Unfold the edge of fabric, and position the e fabric with the wrong side facing up. 3 1 1 2 1 1 S< Seen from the side> a Wrong side of fabric b Basting c Edge of fabric Attach blind hem foot "R". f R 3 a Arm Position the fabric with the edge of the folded j hem against the guide of the presser foot, and then lower the presser foot lever. R 1 b c a Wrong side of fabric b Fold of hem c Guide Adjust the stitch width until the needle slightly k catches the fold of the hem. • For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43). Select a stitch. g • For details, refer to "Selecting stitching" (page 49). R 1 a Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. a a Stitch width Blind Hem Stitching 81