Brother International SE625 Operation Manual - Page 60
Attaching the Embroidery Unit
View all Brother International SE625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Embroidering Preparation While pressing in the lever on embroidery foot "Q" e with your finger, fit the embroidery foot bar over the needle clamp screw. a b c 1 Embroidery foot bar 2 Needle clamp screw 3 Presser bar Secure embroidery foot "Q" with the presser foot f holder screw, making sure that embroidery foot "Q" is vertical. a b 1 Mounting notch 2 Presser foot holder screw Hold the embroidery foot in place with your right g hand, and then use the included screwdriver to securely tighten the presser foot holder screw. CAUTION • Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the presser foot and possibly cause injury. Press h to unlock all keys and buttons. Attaching the Embroidery Unit CAUTION • Before attaching the embroidery unit, be sure to turn off the machine. Otherwise, injuries may occur if one of the operation buttons is accidentally pressed and the machine starts embroidering. • Do not move the machine with the embroidery unit in place. The embroidery unit may be dropped and cause injury. • Keep your hands and other objects away from the embroidery carriage and frame when they are moving. Otherwise injury may result. Turn off the machine. a Pull the flat bed attachment off to the left. b Insert the embroidery unit connector into the c connection port, and then lightly push in the embroidery unit until it snaps into place. 1 Connection port 2 Embroidery unit connector c 3 Carriage a b Note • Make sure that there is no gap between the embroidery unit and the machine, otherwise the embroidery pattern may not be embroidered correctly. Be sure to fully insert the connector into the connection port. • Do not push on the carriage when attaching the embroidery unit to the machine, otherwise damage to the embroidery unit may result. • Do not touch the connector in the embroidery unit connector slot. The connector could be damaged, and it may cause malfunctions. • Do not lift up on the embroidery carriage, and do not forcefully move it. It may cause malfunctions. 58