Brother International SE625 Operation Manual - Page 68
Changing the thread color display
View all Brother International SE625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Embroidering Lower the presser foot, then press the "Start/Stop" d button to start embroidering. After 5-6 stitches, press the "Start/Stop" button again to stop the machine. Trim the excess thread at the end of the seam. If the e end of the seam is under the presser foot, raise the presser foot, then trim the excess thread. ■ Changing the thread color display You can display the name of the thread colors or embroidery thread number. Memo • Colors on the screen may vary slightly from actual spool colors. Press a and use or to display the following settings screen. Use or of the menu to select [Name of b Color] or [#123] (thread number). • If the thread is left at the beginning of the stitching, it may be embroidered over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning. Press the "Start/Stop" button to start embroidering. f → Stitching stops automatically with reinforcement after one color has been completed. When automatic thread cutting is set, the thread is cut. • When [Name of Color] is selected, the name of the thread colors is displayed. • When [#123] is selected, the embroidery thread number is displayed. Use or of the menu to select the thread brand. Remove the thread for the first color from the g machine. Repeat the same steps for embroidering the remaining h colors. Press . c → When the last color is embroidered, the message informing that the embroidering is finished will appear on the display. Press , and the display will return to the initial screen. Cut the excess thread jumps within the color. i 66