Brother International XL 5500 Users Manual - English - Page 10
Converting to Free-arm Style, Steadying the Machine - needle
View all Brother International XL 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Put a different presser foot on the needle plate 3 so that the bar on the presser foot is in line with the slot on the shank. Lower the presser foot lever and fix the 4 presser foot onto the shank. If the presser foot is in the correct place, the bar should snap in. Converting to Free-arm Style Free-arm sewing is convenient for sewing tubular and hard-to-reach areas. To change your machine to the free-arm style, lift out the extension table attachment. 1 Lift the bottom of the extension table up toward you. 2 Pull the extension table out to remove it. 1 1 Extension table Steadying the Machine When the machine is placed on an uneven surface, turn the rubber cushion on the front right-hand side of the base plate to adjust it until the machine is stable. CAUTION ● If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury. 9