Brother International XL 5500 Users Manual - English - Page 42
Fabric Does, Not Feed, Properly, Machine Is, Noisy Or Slow, Needle, Breaks, Machine Does, Not Start
View all Brother International XL 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
FABRIC DOES NOT FEED PROPERLY NEEDLE BREAKS MACHINE IS NOISY OR SLOW MACHINE DOES NOT START Stitch length dial is set at no feeding. Needle is not correctly inserted. Lint is clinging to the bottom of the needle plate. Power supply plug is removed from outlet. Page 13 No Page 8 No Page 39 No Page 6 No The combination of needle size/ thread size/fabric is incorrect. Inferior needle is used. Insufficient oiling. Main power switch is turned off. Page 24 No Page 8 No Page 38 No Page 7 No Inferior needle is used. The combination of needle size/ thread size/fabric is incorrect. Foot controller is not used correctly. Page 8 No Thread is tangled. Page 18 No Page 24 No Fabric is pulled excessively. Let the feed dogs move the fabric. Do not pull the fabric. No Page 7 No The bobbin winding shaft is slid toward the bobbin presser. Page 15 No Feed dogs are lowered. Page 14 No CONTACT YOUR LOCAL SERVICE CENTER 41