Brother International andtrade; QL-570 Users Manual - English - Page 34
Label outlet maintenance, Brother QL-570 on.
View all Brother International andtrade; QL-570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Introduction Creating Labels 4 Remove the backing paper and insert the edge of cleaning sheet into the printing unit until the area pointed with arrow in the diagram below. • Insert the sheet without removing the part of sheet. • Check that the printing surface of cleaning sheet is upward. 5 Close the DK Roll compartment cover and press the ON/OFF button ( ) to turn the Brother QL-570 on. 6 Press the Feed button for more than one second. The roller spins by 4" (10 cm). The adhesive face of cleaning sheet removes the stain or dust on the roller. • If not pressing the Feed button for more than one second, the roller spins only 1/3" (8 mm). • Dispose the cleaning sheet after use. Feed button Label outlet maintenance When the glue is attached on the label outlet and the machine jam a label, pull out the power plug from the outlet and clean it up with cloth dipped into ethanol or isopropyl alcohol. Label outlet Appendix 34 Label outlet maintenance