Canon C50Fi VB-C50Fi manual.pdf - Page 104
Setting Up Motion Detection
![]() |
UPC - 013803049688
View all Canon C50Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Schedule Setting Tool Setting Up Motion Detection To Make Settings... 1. Open the Motion Detection Setting Tool with the Schedule Setting Tool. In the Service tab in a Normal or Special Schedule Setting screen, check Motion Detection, select a setting number and click "Detail" (→ P.4-38). 2. Set the camera frame rate and the camera position for detection (Camera tab). q Set the camera frame rate and camera position. w For camera position, either set your own area for detection in the Live Mode Viewer or select a Preset in the Camera tab. q "Enable frame rate setting" Check to set the frame rate for camera shooting. Enter a value within a range of 0.5-30.0 fps (NTSC)/25.0 fps (PAL). * Please refer to P.1-9 to confirm whether your VB-C50Fi is PAL model or NTSC model. w "Enable preset selection" Check to select a camera position from a preset. The frame rate specified in the "Maximum Frame Rate" (→ P.3-18) must be higher Note than the one specified using this tool. ● When the network traffic is high, the specified frame rate may not be achieved. Tip ● When a slow frame rate is set, motion detection is applied to images sampled from the captured video. In this way, motion can be detected even in slowly moving objects. ● The frame rate specified above only applies to the motion detection. 4-40
![](/manual_guide/products/canon-c50fi-vbc50fi-manualpdf-8cc199c/104.png)